Method of fire control

This is so that he can fire instantly should the other machine gun malfunction or cease fire before the target has been eliminated. Many public buildings are equipped with automatic sprinkler systemswhich release a spray of water on an affected area if a fire is detected.

Even an area where every mound has been treated can soon Method of fire control re-infested by fire ant colonies migrating from untreated areas or floating there on flood water.

Steam is used to control fire in confined areas, while inert gas is employed to extinguish gas, dust, and vapour fires. Fire-retardant building materials have also been developed, such as the paints and chemicals used to coat and impregnate combustible materials, such as wood and fabric.

When only one gunner is required to engage a target and the leader has alerted two or more, the gunner not firing aims on the target and follows the movements of the target. When aiming his weapon at a target, a soldier looking through the sights should be able to see the target.

Ever wondered how it is done to perfection every time? The agitators in some spreaders may cause bait to cake up so that it does not flow properly.

Fire control

Class-C fires[ edit ] Method of fire control fires involve electricity as a continuous power source for the ignition of the fuels associated with electrical equipment, such as plastic cable jackets.

If the leader wants to shift fire at a certain time, the leader gives a prearranged signal such as obscurants or pyrotechnics. The application of a combination of fire suppressant foam mixed with water is a common and effective method of forming a blanket on top of the liquid fuel which eliminates the oxygen needed for combustion.

Approved products must be used according to label directions. Otherwise, the colony will survive. Read the label carefully! To reduce the hazardous effects of fire the most basic mechanism is an alarm system, which warns people to leave a building at once, alerts the fire department, and identifies the location of a fire within a structure.

Treat nuisance mounds or colonies with a contact insecticide applied as an individual mound treatment see below. The primary means of the oral fire control method is the issuance of a fire command.

The leader may alert both gunners in the squad and may have only one fire, depending upon the situation. There may not be one best method for fire ant control, especially in large areas. Another option is to implement an integrated pest management program IPM. Strict construction guidelines are followed to keep fire hazards to a minimum, and highly pressurized sprinklers are installed that act immediately upon any combustion.

Controlling Fire Ants Most people about 80 percent according to one survey try to control fire ants by treating individual mounds. Bush, grass, and forest fires are frequently fought using the same equipment that is used on structural fires. Most active ingredients are contact insecticides that affect the nervous system of ants.

These include heat-sensitive devices, which are activated if a specific temperature is reached; a rate-of-rise detector, which is triggered either by a quick or a gradual escalation of temperature; and smoke detectors, which sense changes caused by the presence of smoke, in the intensity of light, in the refraction of light, or in the ionization of air.

The difference between these fire control measures and the ones we have been discussed previously is these are fire control measures used at the gun-team level generally. Granular products are best applied with a push-type fertilizer spreader and must be watered in after treatment.

Fire Control – Methods

The vital factor in this method of fire control is gunners must be well-disciplined and pay attention to detail. This element prepares the gunners for further instructions.

Fire Ant Control: The Two-Step Method and Other Approaches

Some Class-B fires can be controlled with the application of chemical fire suppressants. Personal contact is used more than other methods by Infantry leaders.

Foaming agents are employed to handle oil fires. Fire retardant and Wildfire The most common method to control a class-A fire is to remove Method of fire control by spraying the burning solid fuels with water.

Also, deep-dwelling colonies that escaped mound treatment can quickly form mounds after a soaking rain. The Two-Step Method and other approaches described here can lower that cost while reducing environmental damage and improving fire ant control. To be effective, the mound treatment must kill the queen s.

Other bait ingredients interfere with reproduction or growth. Red and black imported fire ants Solenopsis invicta and Solenopsis richteri are invasive species and their painful bites can injure or kill livestock, wildlife, domestic animals, and humans. The leader must use maximum cover and concealment to keep from disclosing the position or himself.

Upon seeing the signal, the gunner shifts his fire to a prearranged point. The leader also should designate no-fire zones or restricted fire areas to others. Be sure it is appropriate for where you intend to use it, particularly if you will be treating a vegetable garden or other food production site.

This is still a restricted use pesticide with only one application allowed per year. If you are uncertain about the species, call your local extension office.The Two-Step Method for Fire Ant Control a contact insecticide is applied to the lawn and landscape surface This is more expensive that other control methods but it may be more effective in smaller areas because ants that move into treated areas will be eliminated as long as the chemical is active.

Granular products are best applied with a. Oral: The oral fire control method can be effective, but sometimes the leader may be too far away from the gunner, or the noise of the battle may make it impossible for the gunner to hear.

The primary means of the oral fire control method is. Fire prevention and control: Fire prevention and control, the prevention, detection, and extinguishment of fires, including such secondary activities as research into the causes of fire, education of the public about fire hazards, and the maintenance and improvement of fire-fighting equipment.

Until after World War I little A typical method. There may not be one best method for fire ant control, especially in large areas. Your objective should be to find the method or methods that are most cost-effective, environmentally sound, and fit your tolerance level for fire ants.

Methods Of Fire Control Last Updated on Sat, 28 Apr | Crew Served Machine Guns The noise and confusion of battle may limit the use of some of these methods; therefore, the leader must select a method or combination of methods that will.

Method Of Fire Control 1. Introduction Fire is a chemical reaction that takes place between fuel, heat and oxygen in form of light and noticeable heat.

Fire prevention and control Download
Method of fire control
Rated 3/5 based on 81 review